TCGE-0524-IR00
Drawing Hydraulic symbol
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
Drawing
Electric valve
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 210 bar (3.045 psi)
Flow rate: See Performance graph
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 160 cc/min
P max. 210 bar (3.045 psi)
Standard seals: O-ring NBR Seals Polyurethane
Cavity: SCN1040
Installation torque: 35 Nm
Coil nut torque: 5 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seal kit std.: 5AG0044
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 °C: 24 W
ED*: 100% with ambient temperature range -20 °C +40 °C
Coil code:
(see page 9.02.001)
S190-24S
*Note: For temperature or special conditions contact our sales department.
Performance graph
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
1.15.012.1
E10N-4X0
Description
Electric cartridge valve on/off, spool type, 4 ways, 2 positions.
Operation mode
A spring holds the spool in position so that the oil flow is allowed in
ports 4 with 1 and 3 with 2.
When the solenoid is energized, the spool is pulled to allow
connection of 3 with 4 and 2 with 1.
GENERAL DATA
Weight without coil: 0,32 Kg (0,7 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals (NBR).
Max. proof pressure: 300 bar (4.350 psi).
Flow Max: 20 l/min (5,3 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
0
0
23,2
4,2
5,3
6,4
bar/psi
lpm/gpm
8
12
16
20
24
0
2
4
6
8
29
58
87
116
0
1
4
0
bar/psi
lpm/gpm
0
2.2
1 3,2
4,2
50
100
150
200
250
725
1450
2176
2901
3626
2
0
0
8
12
16
20
4
Solenoid valve 4 ways 2 positions,
direct acting spool type
TCGE-0524-IR00
*Note: Information about manual
override is available at page S.001
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
STANDARD HOUSING
Ordering code: See page 9.03.005
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
Voltage
Seals
DN- Din
DU- Deutsch
AM- Amp Junior
3B- 3/8” BSP
4B- 1/2” BSP
3S- SAE 8
4S- SAE 10
24- Vdc
12- Vdc
Connector
None (std. without coil)
None (std. without override
)
Options*
None (std. only cartridge)
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR)
Y- Polyurethane
For other options
contact Sales dept.
Inches
Millimeters
-
-
Dimensions
S- Screw out
1.15.012.2
E10N-4X0
E10N-4X0
81)$
+H[
